1 | /* $NetBSD: atmuni31.h,v 1.2 2014/11/19 19:33:30 christos Exp $ */ |
2 | |
3 | /* |
4 | * Copyright (c) 1997 Yen Yen Lim and North Dakota State University |
5 | * All rights reserved. |
6 | * |
7 | * Redistribution and use in source and binary forms, with or without |
8 | * modification, are permitted provided that the following conditions |
9 | * are met: |
10 | * 1. Redistributions of source code must retain the above copyright |
11 | * notice, this list of conditions and the following disclaimer. |
12 | * 2. Redistributions in binary form must reproduce the above copyright |
13 | * notice, this list of conditions and the following disclaimer in the |
14 | * documentation and/or other materials provided with the distribution. |
15 | * 3. All advertising materials mentioning features or use of this software |
16 | * must display the following acknowledgement: |
17 | * This product includes software developed by Yen Yen Lim and |
18 | North Dakota State University |
19 | * 4. The name of the author may not be used to endorse or promote products |
20 | * derived from this software without specific prior written permission. |
21 | * |
22 | * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR |
23 | * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
24 | * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
25 | * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, |
26 | * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
27 | * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
28 | * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
29 | * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
30 | * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN |
31 | * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
32 | * POSSIBILITY OF SUCH DAMAGE. |
33 | */ |
34 | |
35 | /* Based on UNI3.1 standard by ATM Forum */ |
36 | |
37 | /* ATM traffic types based on VPI=0 and (the following VCI */ |
38 | #define VCI_PPC 0x05 /* Point-to-point signal msg */ |
39 | #define VCI_BCC 0x02 /* Broadcast signal msg */ |
40 | #define VCI_OAMF4SC 0x03 /* Segment OAM F4 flow cell */ |
41 | #define VCI_OAMF4EC 0x04 /* End-to-end OAM F4 flow cell */ |
42 | #define VCI_METAC 0x01 /* Meta signal msg */ |
43 | #define VCI_ILMIC 0x10 /* ILMI msg */ |
44 | |
45 | /* Q.2931 signalling messages */ |
46 | #define CALL_PROCEED 0x02 /* call proceeding */ |
47 | #define CONNECT 0x07 /* connect */ |
48 | #define CONNECT_ACK 0x0f /* connect_ack */ |
49 | #define SETUP 0x05 /* setup */ |
50 | #define RELEASE 0x4d /* release */ |
51 | #define RELEASE_DONE 0x5a /* release_done */ |
52 | #define RESTART 0x46 /* restart */ |
53 | #define RESTART_ACK 0x4e /* restart ack */ |
54 | #define STATUS 0x7d /* status */ |
55 | #define STATUS_ENQ 0x75 /* status ack */ |
56 | #define ADD_PARTY 0x80 /* add party */ |
57 | #define ADD_PARTY_ACK 0x81 /* add party ack */ |
58 | #define ADD_PARTY_REJ 0x82 /* add party rej */ |
59 | #define DROP_PARTY 0x83 /* drop party */ |
60 | #define DROP_PARTY_ACK 0x84 /* drop party ack */ |
61 | |
62 | /* Information Element Parameters in the signalling messages */ |
63 | #define CAUSE 0x08 /* cause */ |
64 | #define ENDPT_REF 0x54 /* endpoint reference */ |
65 | #define AAL_PARA 0x58 /* ATM adaptation layer parameters */ |
66 | #define TRAFF_DESCRIP 0x59 /* atm traffic descriptors */ |
67 | #define CONNECT_ID 0x5a /* connection identifier */ |
68 | #define QOS_PARA 0x5c /* quality of service parameters */ |
69 | #define B_HIGHER 0x5d /* broadband higher layer information */ |
70 | #define B_BEARER 0x5e /* broadband bearer capability */ |
71 | #define B_LOWER 0x5f /* broadband lower information */ |
72 | #define CALLING_PARTY 0x6c /* calling party number */ |
73 | #define CALLED_PARTY 0x70 /* called party nmber */ |
74 | |
75 | #define Q2931 0x09 |
76 | |
77 | /* Q.2931 signalling general messages format */ |
78 | #define PROTO_POS 0 /* offset of protocol discriminator */ |
79 | #define CALL_REF_POS 2 /* offset of call reference value */ |
80 | #define MSG_TYPE_POS 5 /* offset of message type */ |
81 | #define MSG_LEN_POS 7 /* offset of mesage length */ |
82 | #define IE_BEGIN_POS 9 /* offset of first information element */ |
83 | |
84 | /* format of signalling messages */ |
85 | #define TYPE_POS 0 |
86 | #define LEN_POS 2 |
87 | #define FIELD_BEGIN_POS 4 |
88 | |