1 | /****************************************************************************** |
2 | * |
3 | * Name: acexcep.h - Exception codes returned by the ACPI subsystem |
4 | * |
5 | *****************************************************************************/ |
6 | |
7 | /* |
8 | * Copyright (C) 2000 - 2019, Intel Corp. |
9 | * All rights reserved. |
10 | * |
11 | * Redistribution and use in source and binary forms, with or without |
12 | * modification, are permitted provided that the following conditions |
13 | * are met: |
14 | * 1. Redistributions of source code must retain the above copyright |
15 | * notice, this list of conditions, and the following disclaimer, |
16 | * without modification. |
17 | * 2. Redistributions in binary form must reproduce at minimum a disclaimer |
18 | * substantially similar to the "NO WARRANTY" disclaimer below |
19 | * ("Disclaimer") and any redistribution must be conditioned upon |
20 | * including a substantially similar Disclaimer requirement for further |
21 | * binary redistribution. |
22 | * 3. Neither the names of the above-listed copyright holders nor the names |
23 | * of any contributors may be used to endorse or promote products derived |
24 | * from this software without specific prior written permission. |
25 | * |
26 | * Alternatively, this software may be distributed under the terms of the |
27 | * GNU General Public License ("GPL") version 2 as published by the Free |
28 | * Software Foundation. |
29 | * |
30 | * NO WARRANTY |
31 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
32 | * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
33 | * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR |
34 | * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
35 | * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
36 | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
37 | * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
38 | * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
39 | * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
40 | * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
41 | * POSSIBILITY OF SUCH DAMAGES. |
42 | */ |
43 | |
44 | #ifndef __ACEXCEP_H__ |
45 | #define __ACEXCEP_H__ |
46 | |
47 | |
48 | /* This module contains all possible exception codes for ACPI_STATUS */ |
49 | |
50 | /* |
51 | * Exception code classes |
52 | */ |
53 | #define AE_CODE_ENVIRONMENTAL 0x0000 /* General ACPICA environment */ |
54 | #define AE_CODE_PROGRAMMER 0x1000 /* External ACPICA interface caller */ |
55 | #define AE_CODE_ACPI_TABLES 0x2000 /* ACPI tables */ |
56 | #define AE_CODE_AML 0x3000 /* From executing AML code */ |
57 | #define AE_CODE_CONTROL 0x4000 /* Internal control codes */ |
58 | |
59 | #define AE_CODE_MAX 0x4000 |
60 | #define AE_CODE_MASK 0xF000 |
61 | |
62 | /* |
63 | * Macros to insert the exception code classes |
64 | */ |
65 | #define EXCEP_ENV(code) ((ACPI_STATUS) (code | AE_CODE_ENVIRONMENTAL)) |
66 | #define EXCEP_PGM(code) ((ACPI_STATUS) (code | AE_CODE_PROGRAMMER)) |
67 | #define EXCEP_TBL(code) ((ACPI_STATUS) (code | AE_CODE_ACPI_TABLES)) |
68 | #define EXCEP_AML(code) ((ACPI_STATUS) (code | AE_CODE_AML)) |
69 | #define EXCEP_CTL(code) ((ACPI_STATUS) (code | AE_CODE_CONTROL)) |
70 | |
71 | /* |
72 | * Exception info table. The "Description" field is used only by the |
73 | * ACPICA help application (acpihelp). |
74 | */ |
75 | typedef struct acpi_exception_info |
76 | { |
77 | const char *Name; |
78 | |
79 | #ifdef ACPI_HELP_APP |
80 | const char *Description; |
81 | #endif |
82 | } ACPI_EXCEPTION_INFO; |
83 | |
84 | #ifdef ACPI_HELP_APP |
85 | #define EXCEP_TXT(Name,Description) {Name, Description} |
86 | #else |
87 | #define EXCEP_TXT(Name,Description) {Name} |
88 | #endif |
89 | |
90 | |
91 | /* |
92 | * Success is always zero, failure is non-zero |
93 | */ |
94 | #define ACPI_SUCCESS(a) (!(a)) |
95 | #define ACPI_FAILURE(a) (a) |
96 | |
97 | #define AE_OK (ACPI_STATUS) 0x0000 |
98 | |
99 | #define ACPI_ENV_EXCEPTION(Status) (Status & AE_CODE_ENVIRONMENTAL) |
100 | #define ACPI_AML_EXCEPTION(Status) (Status & AE_CODE_AML) |
101 | #define ACPI_PROG_EXCEPTION(Status) (Status & AE_CODE_PROGRAMMER) |
102 | #define ACPI_TABLE_EXCEPTION(Status) (Status & AE_CODE_ACPI_TABLES) |
103 | #define ACPI_CNTL_EXCEPTION(Status) (Status & AE_CODE_CONTROL) |
104 | |
105 | |
106 | /* |
107 | * Environmental exceptions |
108 | */ |
109 | #define AE_ERROR EXCEP_ENV (0x0001) |
110 | #define AE_NO_ACPI_TABLES EXCEP_ENV (0x0002) |
111 | #define AE_NO_NAMESPACE EXCEP_ENV (0x0003) |
112 | #define AE_NO_MEMORY EXCEP_ENV (0x0004) |
113 | #define AE_NOT_FOUND EXCEP_ENV (0x0005) |
114 | #define AE_NOT_EXIST EXCEP_ENV (0x0006) |
115 | #define AE_ALREADY_EXISTS EXCEP_ENV (0x0007) |
116 | #define AE_TYPE EXCEP_ENV (0x0008) |
117 | #define AE_NULL_OBJECT EXCEP_ENV (0x0009) |
118 | #define AE_NULL_ENTRY EXCEP_ENV (0x000A) |
119 | #define AE_BUFFER_OVERFLOW EXCEP_ENV (0x000B) |
120 | #define AE_STACK_OVERFLOW EXCEP_ENV (0x000C) |
121 | #define AE_STACK_UNDERFLOW EXCEP_ENV (0x000D) |
122 | #define AE_NOT_IMPLEMENTED EXCEP_ENV (0x000E) |
123 | #define AE_SUPPORT EXCEP_ENV (0x000F) |
124 | #define AE_LIMIT EXCEP_ENV (0x0010) |
125 | #define AE_TIME EXCEP_ENV (0x0011) |
126 | #define AE_ACQUIRE_DEADLOCK EXCEP_ENV (0x0012) |
127 | #define AE_RELEASE_DEADLOCK EXCEP_ENV (0x0013) |
128 | #define AE_NOT_ACQUIRED EXCEP_ENV (0x0014) |
129 | #define AE_ALREADY_ACQUIRED EXCEP_ENV (0x0015) |
130 | #define AE_NO_HARDWARE_RESPONSE EXCEP_ENV (0x0016) |
131 | #define AE_NO_GLOBAL_LOCK EXCEP_ENV (0x0017) |
132 | #define AE_ABORT_METHOD EXCEP_ENV (0x0018) |
133 | #define AE_SAME_HANDLER EXCEP_ENV (0x0019) |
134 | #define AE_NO_HANDLER EXCEP_ENV (0x001A) |
135 | #define AE_OWNER_ID_LIMIT EXCEP_ENV (0x001B) |
136 | #define AE_NOT_CONFIGURED EXCEP_ENV (0x001C) |
137 | #define AE_ACCESS EXCEP_ENV (0x001D) |
138 | #define AE_IO_ERROR EXCEP_ENV (0x001E) |
139 | #define AE_NUMERIC_OVERFLOW EXCEP_ENV (0x001F) |
140 | #define AE_HEX_OVERFLOW EXCEP_ENV (0x0020) |
141 | #define AE_DECIMAL_OVERFLOW EXCEP_ENV (0x0021) |
142 | #define AE_OCTAL_OVERFLOW EXCEP_ENV (0x0022) |
143 | #define AE_END_OF_TABLE EXCEP_ENV (0x0023) |
144 | |
145 | #define AE_CODE_ENV_MAX 0x0023 |
146 | |
147 | |
148 | /* |
149 | * Programmer exceptions |
150 | */ |
151 | #define AE_BAD_PARAMETER EXCEP_PGM (0x0001) |
152 | #define AE_BAD_CHARACTER EXCEP_PGM (0x0002) |
153 | #define AE_BAD_PATHNAME EXCEP_PGM (0x0003) |
154 | #define AE_BAD_DATA EXCEP_PGM (0x0004) |
155 | #define AE_BAD_HEX_CONSTANT EXCEP_PGM (0x0005) |
156 | #define AE_BAD_OCTAL_CONSTANT EXCEP_PGM (0x0006) |
157 | #define AE_BAD_DECIMAL_CONSTANT EXCEP_PGM (0x0007) |
158 | #define AE_MISSING_ARGUMENTS EXCEP_PGM (0x0008) |
159 | #define AE_BAD_ADDRESS EXCEP_PGM (0x0009) |
160 | |
161 | #define AE_CODE_PGM_MAX 0x0009 |
162 | |
163 | |
164 | /* |
165 | * Acpi table exceptions |
166 | */ |
167 | #define AE_BAD_SIGNATURE EXCEP_TBL (0x0001) |
168 | #define EXCEP_TBL (0x0002) |
169 | #define AE_BAD_CHECKSUM EXCEP_TBL (0x0003) |
170 | #define AE_BAD_VALUE EXCEP_TBL (0x0004) |
171 | #define AE_INVALID_TABLE_LENGTH EXCEP_TBL (0x0005) |
172 | |
173 | #define AE_CODE_TBL_MAX 0x0005 |
174 | |
175 | |
176 | /* |
177 | * AML exceptions. These are caused by problems with |
178 | * the actual AML byte stream |
179 | */ |
180 | #define AE_AML_BAD_OPCODE EXCEP_AML (0x0001) |
181 | #define AE_AML_NO_OPERAND EXCEP_AML (0x0002) |
182 | #define AE_AML_OPERAND_TYPE EXCEP_AML (0x0003) |
183 | #define AE_AML_OPERAND_VALUE EXCEP_AML (0x0004) |
184 | #define AE_AML_UNINITIALIZED_LOCAL EXCEP_AML (0x0005) |
185 | #define AE_AML_UNINITIALIZED_ARG EXCEP_AML (0x0006) |
186 | #define AE_AML_UNINITIALIZED_ELEMENT EXCEP_AML (0x0007) |
187 | #define AE_AML_NUMERIC_OVERFLOW EXCEP_AML (0x0008) |
188 | #define AE_AML_REGION_LIMIT EXCEP_AML (0x0009) |
189 | #define AE_AML_BUFFER_LIMIT EXCEP_AML (0x000A) |
190 | #define AE_AML_PACKAGE_LIMIT EXCEP_AML (0x000B) |
191 | #define AE_AML_DIVIDE_BY_ZERO EXCEP_AML (0x000C) |
192 | #define AE_AML_BAD_NAME EXCEP_AML (0x000D) |
193 | #define AE_AML_NAME_NOT_FOUND EXCEP_AML (0x000E) |
194 | #define AE_AML_INTERNAL EXCEP_AML (0x000F) |
195 | #define AE_AML_INVALID_SPACE_ID EXCEP_AML (0x0010) |
196 | #define AE_AML_STRING_LIMIT EXCEP_AML (0x0011) |
197 | #define AE_AML_NO_RETURN_VALUE EXCEP_AML (0x0012) |
198 | #define AE_AML_METHOD_LIMIT EXCEP_AML (0x0013) |
199 | #define AE_AML_NOT_OWNER EXCEP_AML (0x0014) |
200 | #define AE_AML_MUTEX_ORDER EXCEP_AML (0x0015) |
201 | #define AE_AML_MUTEX_NOT_ACQUIRED EXCEP_AML (0x0016) |
202 | #define AE_AML_INVALID_RESOURCE_TYPE EXCEP_AML (0x0017) |
203 | #define AE_AML_INVALID_INDEX EXCEP_AML (0x0018) |
204 | #define AE_AML_REGISTER_LIMIT EXCEP_AML (0x0019) |
205 | #define AE_AML_NO_WHILE EXCEP_AML (0x001A) |
206 | #define AE_AML_ALIGNMENT EXCEP_AML (0x001B) |
207 | #define AE_AML_NO_RESOURCE_END_TAG EXCEP_AML (0x001C) |
208 | #define AE_AML_BAD_RESOURCE_VALUE EXCEP_AML (0x001D) |
209 | #define AE_AML_CIRCULAR_REFERENCE EXCEP_AML (0x001E) |
210 | #define AE_AML_BAD_RESOURCE_LENGTH EXCEP_AML (0x001F) |
211 | #define AE_AML_ILLEGAL_ADDRESS EXCEP_AML (0x0020) |
212 | #define AE_AML_LOOP_TIMEOUT EXCEP_AML (0x0021) |
213 | #define AE_AML_UNINITIALIZED_NODE EXCEP_AML (0x0022) |
214 | #define AE_AML_TARGET_TYPE EXCEP_AML (0x0023) |
215 | #define AE_AML_PROTOCOL EXCEP_AML (0x0024) |
216 | #define AE_AML_BUFFER_LENGTH EXCEP_AML (0x0025) |
217 | |
218 | #define AE_CODE_AML_MAX 0x0025 |
219 | |
220 | |
221 | /* |
222 | * Internal exceptions used for control |
223 | */ |
224 | #define AE_CTRL_RETURN_VALUE EXCEP_CTL (0x0001) |
225 | #define AE_CTRL_PENDING EXCEP_CTL (0x0002) |
226 | #define AE_CTRL_TERMINATE EXCEP_CTL (0x0003) |
227 | #define AE_CTRL_TRUE EXCEP_CTL (0x0004) |
228 | #define AE_CTRL_FALSE EXCEP_CTL (0x0005) |
229 | #define AE_CTRL_DEPTH EXCEP_CTL (0x0006) |
230 | #define AE_CTRL_END EXCEP_CTL (0x0007) |
231 | #define AE_CTRL_TRANSFER EXCEP_CTL (0x0008) |
232 | #define AE_CTRL_BREAK EXCEP_CTL (0x0009) |
233 | #define AE_CTRL_CONTINUE EXCEP_CTL (0x000A) |
234 | #define AE_CTRL_PARSE_CONTINUE EXCEP_CTL (0x000B) |
235 | #define AE_CTRL_PARSE_PENDING EXCEP_CTL (0x000C) |
236 | |
237 | #define AE_CODE_CTRL_MAX 0x000C |
238 | |
239 | |
240 | /* Exception strings for AcpiFormatException */ |
241 | |
242 | #ifdef ACPI_DEFINE_EXCEPTION_TABLE |
243 | |
244 | /* |
245 | * String versions of the exception codes above |
246 | * These strings must match the corresponding defines exactly |
247 | */ |
248 | static const ACPI_EXCEPTION_INFO AcpiGbl_ExceptionNames_Env[] = |
249 | { |
250 | EXCEP_TXT ("AE_OK" , "No error" ), |
251 | EXCEP_TXT ("AE_ERROR" , "Unspecified error" ), |
252 | EXCEP_TXT ("AE_NO_ACPI_TABLES" , "ACPI tables could not be found" ), |
253 | EXCEP_TXT ("AE_NO_NAMESPACE" , "A namespace has not been loaded" ), |
254 | EXCEP_TXT ("AE_NO_MEMORY" , "Insufficient dynamic memory" ), |
255 | EXCEP_TXT ("AE_NOT_FOUND" , "A requested entity is not found" ), |
256 | EXCEP_TXT ("AE_NOT_EXIST" , "A required entity does not exist" ), |
257 | EXCEP_TXT ("AE_ALREADY_EXISTS" , "An entity already exists" ), |
258 | EXCEP_TXT ("AE_TYPE" , "The object type is incorrect" ), |
259 | EXCEP_TXT ("AE_NULL_OBJECT" , "A required object was missing" ), |
260 | EXCEP_TXT ("AE_NULL_ENTRY" , "The requested object does not exist" ), |
261 | EXCEP_TXT ("AE_BUFFER_OVERFLOW" , "The buffer provided is too small" ), |
262 | EXCEP_TXT ("AE_STACK_OVERFLOW" , "An internal stack overflowed" ), |
263 | EXCEP_TXT ("AE_STACK_UNDERFLOW" , "An internal stack underflowed" ), |
264 | EXCEP_TXT ("AE_NOT_IMPLEMENTED" , "The feature is not implemented" ), |
265 | EXCEP_TXT ("AE_SUPPORT" , "The feature is not supported" ), |
266 | EXCEP_TXT ("AE_LIMIT" , "A predefined limit was exceeded" ), |
267 | EXCEP_TXT ("AE_TIME" , "A time limit or timeout expired" ), |
268 | EXCEP_TXT ("AE_ACQUIRE_DEADLOCK" , "Internal error, attempt was made to acquire a mutex in improper order" ), |
269 | EXCEP_TXT ("AE_RELEASE_DEADLOCK" , "Internal error, attempt was made to release a mutex in improper order" ), |
270 | EXCEP_TXT ("AE_NOT_ACQUIRED" , "An attempt to release a mutex or Global Lock without a previous acquire" ), |
271 | EXCEP_TXT ("AE_ALREADY_ACQUIRED" , "Internal error, attempt was made to acquire a mutex twice" ), |
272 | EXCEP_TXT ("AE_NO_HARDWARE_RESPONSE" , "Hardware did not respond after an I/O operation" ), |
273 | EXCEP_TXT ("AE_NO_GLOBAL_LOCK" , "There is no FACS Global Lock" ), |
274 | EXCEP_TXT ("AE_ABORT_METHOD" , "A control method was aborted" ), |
275 | EXCEP_TXT ("AE_SAME_HANDLER" , "Attempt was made to install the same handler that is already installed" ), |
276 | EXCEP_TXT ("AE_NO_HANDLER" , "A handler for the operation is not installed" ), |
277 | EXCEP_TXT ("AE_OWNER_ID_LIMIT" , "There are no more Owner IDs available for ACPI tables or control methods" ), |
278 | EXCEP_TXT ("AE_NOT_CONFIGURED" , "The interface is not part of the current subsystem configuration" ), |
279 | EXCEP_TXT ("AE_ACCESS" , "Permission denied for the requested operation" ), |
280 | EXCEP_TXT ("AE_IO_ERROR" , "An I/O error occurred" ), |
281 | EXCEP_TXT ("AE_NUMERIC_OVERFLOW" , "Overflow during string-to-integer conversion" ), |
282 | EXCEP_TXT ("AE_HEX_OVERFLOW" , "Overflow during ASCII hex-to-binary conversion" ), |
283 | EXCEP_TXT ("AE_DECIMAL_OVERFLOW" , "Overflow during ASCII decimal-to-binary conversion" ), |
284 | EXCEP_TXT ("AE_OCTAL_OVERFLOW" , "Overflow during ASCII octal-to-binary conversion" ), |
285 | EXCEP_TXT ("AE_END_OF_TABLE" , "Reached the end of table" ) |
286 | }; |
287 | |
288 | static const ACPI_EXCEPTION_INFO AcpiGbl_ExceptionNames_Pgm[] = |
289 | { |
290 | EXCEP_TXT (NULL, NULL), |
291 | EXCEP_TXT ("AE_BAD_PARAMETER" , "A parameter is out of range or invalid" ), |
292 | EXCEP_TXT ("AE_BAD_CHARACTER" , "An invalid character was found in a name" ), |
293 | EXCEP_TXT ("AE_BAD_PATHNAME" , "An invalid character was found in a pathname" ), |
294 | EXCEP_TXT ("AE_BAD_DATA" , "A package or buffer contained incorrect data" ), |
295 | EXCEP_TXT ("AE_BAD_HEX_CONSTANT" , "Invalid character in a Hex constant" ), |
296 | EXCEP_TXT ("AE_BAD_OCTAL_CONSTANT" , "Invalid character in an Octal constant" ), |
297 | EXCEP_TXT ("AE_BAD_DECIMAL_CONSTANT" , "Invalid character in a Decimal constant" ), |
298 | EXCEP_TXT ("AE_MISSING_ARGUMENTS" , "Too few arguments were passed to a control method" ), |
299 | EXCEP_TXT ("AE_BAD_ADDRESS" , "An illegal null I/O address" ) |
300 | }; |
301 | |
302 | static const ACPI_EXCEPTION_INFO AcpiGbl_ExceptionNames_Tbl[] = |
303 | { |
304 | EXCEP_TXT (NULL, NULL), |
305 | EXCEP_TXT ("AE_BAD_SIGNATURE" , "An ACPI table has an invalid signature" ), |
306 | EXCEP_TXT ("AE_BAD_HEADER" , "Invalid field in an ACPI table header" ), |
307 | EXCEP_TXT ("AE_BAD_CHECKSUM" , "An ACPI table checksum is not correct" ), |
308 | EXCEP_TXT ("AE_BAD_VALUE" , "An invalid value was found in a table" ), |
309 | EXCEP_TXT ("AE_INVALID_TABLE_LENGTH" , "The FADT or FACS has improper length" ) |
310 | }; |
311 | |
312 | static const ACPI_EXCEPTION_INFO AcpiGbl_ExceptionNames_Aml[] = |
313 | { |
314 | EXCEP_TXT (NULL, NULL), |
315 | EXCEP_TXT ("AE_AML_BAD_OPCODE" , "Invalid AML opcode encountered" ), |
316 | EXCEP_TXT ("AE_AML_NO_OPERAND" , "A required operand is missing" ), |
317 | EXCEP_TXT ("AE_AML_OPERAND_TYPE" , "An operand of an incorrect type was encountered" ), |
318 | EXCEP_TXT ("AE_AML_OPERAND_VALUE" , "The operand had an inappropriate or invalid value" ), |
319 | EXCEP_TXT ("AE_AML_UNINITIALIZED_LOCAL" , "Method tried to use an uninitialized local variable" ), |
320 | EXCEP_TXT ("AE_AML_UNINITIALIZED_ARG" , "Method tried to use an uninitialized argument" ), |
321 | EXCEP_TXT ("AE_AML_UNINITIALIZED_ELEMENT" , "Method tried to use an empty package element" ), |
322 | EXCEP_TXT ("AE_AML_NUMERIC_OVERFLOW" , "Overflow during BCD conversion or other" ), |
323 | EXCEP_TXT ("AE_AML_REGION_LIMIT" , "Tried to access beyond the end of an Operation Region" ), |
324 | EXCEP_TXT ("AE_AML_BUFFER_LIMIT" , "Tried to access beyond the end of a buffer" ), |
325 | EXCEP_TXT ("AE_AML_PACKAGE_LIMIT" , "Tried to access beyond the end of a package" ), |
326 | EXCEP_TXT ("AE_AML_DIVIDE_BY_ZERO" , "During execution of AML Divide operator" ), |
327 | EXCEP_TXT ("AE_AML_BAD_NAME" , "An ACPI name contains invalid character(s)" ), |
328 | EXCEP_TXT ("AE_AML_NAME_NOT_FOUND" , "Could not resolve a named reference" ), |
329 | EXCEP_TXT ("AE_AML_INTERNAL" , "An internal error within the interpreter" ), |
330 | EXCEP_TXT ("AE_AML_INVALID_SPACE_ID" , "An Operation Region SpaceID is invalid" ), |
331 | EXCEP_TXT ("AE_AML_STRING_LIMIT" , "String is longer than 200 characters" ), |
332 | EXCEP_TXT ("AE_AML_NO_RETURN_VALUE" , "A method did not return a required value" ), |
333 | EXCEP_TXT ("AE_AML_METHOD_LIMIT" , "A control method reached the maximum reentrancy limit of 255" ), |
334 | EXCEP_TXT ("AE_AML_NOT_OWNER" , "A thread tried to release a mutex that it does not own" ), |
335 | EXCEP_TXT ("AE_AML_MUTEX_ORDER" , "Mutex SyncLevel release mismatch" ), |
336 | EXCEP_TXT ("AE_AML_MUTEX_NOT_ACQUIRED" , "Attempt to release a mutex that was not previously acquired" ), |
337 | EXCEP_TXT ("AE_AML_INVALID_RESOURCE_TYPE" , "Invalid resource type in resource list" ), |
338 | EXCEP_TXT ("AE_AML_INVALID_INDEX" , "Invalid Argx or Localx (x too large)" ), |
339 | EXCEP_TXT ("AE_AML_REGISTER_LIMIT" , "Bank value or Index value beyond range of register" ), |
340 | EXCEP_TXT ("AE_AML_NO_WHILE" , "Break or Continue without a While" ), |
341 | EXCEP_TXT ("AE_AML_ALIGNMENT" , "Non-aligned memory transfer on platform that does not support this" ), |
342 | EXCEP_TXT ("AE_AML_NO_RESOURCE_END_TAG" , "No End Tag in a resource list" ), |
343 | EXCEP_TXT ("AE_AML_BAD_RESOURCE_VALUE" , "Invalid value of a resource element" ), |
344 | EXCEP_TXT ("AE_AML_CIRCULAR_REFERENCE" , "Two references refer to each other" ), |
345 | EXCEP_TXT ("AE_AML_BAD_RESOURCE_LENGTH" , "The length of a Resource Descriptor in the AML is incorrect" ), |
346 | EXCEP_TXT ("AE_AML_ILLEGAL_ADDRESS" , "A memory, I/O, or PCI configuration address is invalid" ), |
347 | EXCEP_TXT ("AE_AML_LOOP_TIMEOUT" , "An AML While loop exceeded the maximum execution time" ), |
348 | EXCEP_TXT ("AE_AML_UNINITIALIZED_NODE" , "A namespace node is uninitialized or unresolved" ), |
349 | EXCEP_TXT ("AE_AML_TARGET_TYPE" , "A target operand of an incorrect type was encountered" ), |
350 | EXCEP_TXT ("AE_AML_PROTOCOL" , "Violation of a fixed ACPI protocol" ), |
351 | EXCEP_TXT ("AE_AML_BUFFER_LENGTH" , "The length of the buffer is invalid/incorrect" ) |
352 | }; |
353 | |
354 | static const ACPI_EXCEPTION_INFO AcpiGbl_ExceptionNames_Ctrl[] = |
355 | { |
356 | EXCEP_TXT (NULL, NULL), |
357 | EXCEP_TXT ("AE_CTRL_RETURN_VALUE" , "A Method returned a value" ), |
358 | EXCEP_TXT ("AE_CTRL_PENDING" , "Method is calling another method" ), |
359 | EXCEP_TXT ("AE_CTRL_TERMINATE" , "Terminate the executing method" ), |
360 | EXCEP_TXT ("AE_CTRL_TRUE" , "An If or While predicate result" ), |
361 | EXCEP_TXT ("AE_CTRL_FALSE" , "An If or While predicate result" ), |
362 | EXCEP_TXT ("AE_CTRL_DEPTH" , "Maximum search depth has been reached" ), |
363 | EXCEP_TXT ("AE_CTRL_END" , "An If or While predicate is false" ), |
364 | EXCEP_TXT ("AE_CTRL_TRANSFER" , "Transfer control to called method" ), |
365 | EXCEP_TXT ("AE_CTRL_BREAK" , "A Break has been executed" ), |
366 | EXCEP_TXT ("AE_CTRL_CONTINUE" , "A Continue has been executed" ), |
367 | EXCEP_TXT ("AE_CTRL_PARSE_CONTINUE" , "Used to skip over bad opcodes" ), |
368 | EXCEP_TXT ("AE_CTRL_PARSE_PENDING" , "Used to implement AML While loops" ) |
369 | }; |
370 | |
371 | #endif /* EXCEPTION_TABLE */ |
372 | |
373 | #endif /* __ACEXCEP_H__ */ |
374 | |